Ackuretta SOL - 5.2.2 System Settings & Information

33
5.2.2 System settings & information
The System screen gives you access to system information, and
allows you to set a name for your printer and control whether you
share diagnostic information with Ackuretta.
Subnet Mask Set a subnet mask on the
printer so that you can sepa-
rate the IP address into the
network and host addresses.
Default Gateway Set a default gateway to set a
path for your printer to access
a specific network segment.
Find DNS server automati-
cally
Turn this on to allow the
printer to be discovered on a
network. Otherwise, you can
set the subsequent DNS server
settings.
Primary DNS Server Set the first point of contact
for printer if you need to con-
trol it over a wide area network
(WAN)
Secondary DNS server Set the second point of con-
tact for printer if you need to
control it over a wide area net-
work (WAN)
Table 4: Network Settings
Setting Description