18
3.3.2 Connecting to a wireless network
Connect your printer to a Wi-Fi network so that you can get access
to the web console and start prints via an Internet browser.
To connect to a wireless network:
Step 1 Press the System button on the Home screen, select
Network.
Step 2 Press Choose Network to see a list of available wire-
less networks.
More info: You can swipe up and down to see the
complete list if there are more than three.
More info: The Wi-Fi icon shows the strength of the
Wi-Fi signal; There is a lock icon adjacent to pass-
word-protected networks.
Step 3 Select the network that you want to use and key in
the password if your wireless network is password-
protected.
Result of this task: When you are connected to a network. The
list shows you are Connected to a specific Wi-Fi network and your
printer’s IP address is visible on the Wi-Fi page
You can now open an Internet browser, key in your printer’s IP
address into the address bar, and operate the printer from your
computer.
3.3.3 Configuring a static IP address
Most network connections use a dynamic IP address and DNS
servers. If your network security system requires that you set a
Static IP address or DNS server, you must go to the Network Set-
tings. Please refer to page # for more information.
To Next Page
Loading...
