21
Printing
4.1 Starting the print process
4.1.1 Printing via a USB device
This section shows how to start the print process via a USB device.
To print over a network connection, see “Printing via the web con-
sole” on page 22.
Note: You must
first make sure that
you have a print
file on a USB
device.
Step 1 Make sure the vat is attached to the printer and has
enough resin, and that the build platform is in place.
Step 2 Connect the flash drive to the USB port on the back
of the printer.
Step 3 Press Print on the Home screen.
Step 4 Select the USB tab to view the files on the USB
device.
More info: You can swipe up and down to view a
long list of files.
Step 5 Select the IBF file that you want to print.
To Next Page
Loading...
