47
Step 4 Pour the resin into the bottle using one of the
grooves in a corner.
• You can use a rubber spatula to push the resin
down to preserve more resin. Never use metal
tools on the vat film.
Step 5 Put the vat down on the table.
Step 6 Spray cleaning alcohol into the vat.
Step 7 Use a card to mix the alcohol and remaining resin
with the spatula.
Step 8 Use tissues to absorb the resin.
Step 9 Dispose of the alcohol and resin mixture.
• Some resin gets trapped between the vat frame
and vat film. You must remove this resin.
Step 10 Use the card or spatula to gently push the vat film
down so there is a small gap between the vat frame
and the vat film.
Step 11 Spray alcohol into the gap between the vat frame
and vat film.
Step 12 Use the card or spatula to push a tissue into the gap
to absorb the alcohol and resin mixture.
• Repeat this process until there is no resin
between the vat frame and vat film.
Step 13 Spray more cleaning alcohol into the center of the
vat.
Step 14 Use tissues and compressed air to dry the remaining
alcohol.
To Next Page
Loading...
