WORKING WITH THE CONTROL UNIT 5-7
SB1391 Hardware and Setup Guide - Document revision no. 1.14
sync with the application database (on the PC). If the control module is shut off during an
adjustment session and the data was not saved to the module's nonvolatile memory, that
synchronization will be lost and the adjustment session must be repeated.
5.2.2. Starting ACS Adjuster
Further information
This guide does not cover Microsoft Windows, the PC environment in which
ACS software tools run. For more detailed information about MS Windows,
consult the appropriate user documentation.
Action Effect of action
On the Windows Start menu,
point to the ACS Tools
program group and click ACS
Adjuster.
The main Adjuster window opens, as shown in
FIGURE 5-3.
To Next Page
Loading...