14
receiver and click Connect. (The “Connect Automatically” checkbox is optional.)
Note: If your receiver is not found, you can click the Scan button to scan again.
3. A PIN entry box is displayed on the screen of the WiDi device. Type the PIN provided by
your network administrator in the PIN entry box on the WiDi device, and then click
Continue.
Note:
By default, the security PIN is “12345670”, if no PIN is displayed on the
connected display device. You should obtain the security PIN from your network
administrator.
If a PIN is displayed on the connected display device, you should type this PIN in
the PIN entry box.
To Next Page
Loading...
Need help?
General
