ActionTec SBWD100B User Manual

23
Part V. Device Management for IT
Administrator
ScreenBeam Pro EDU-2 provides a local management web server to manage the device.
With the web server, IT administrators can configure the receiver easily.
5.1. Log into the Local Management Web Server
There are two situations: when the receiver’s wireless network SSID broadcast is enabled
and when it is disabled. Refer to Section 5.3.17. Setting up Broadcast Network Name for
detail about disabling/enabling the receiver’s wireless network SSID broadcast.
5.1.1. When SSID Broadcast is Enabled
Follow the procedure below to log into the local management web server:
1. Connect to the receiver’s SSID from a wireless-enabled laptop (or other devices with Wi-
Fi access ability and a web browser). You can find the receiver’s SSID in the lower left
corner of the Ready to connect screen.
2. Click the Wi-Fi network icon on the taskbar of your device, and find the receiver’s wireless
SSID. Click the Connect button.

ActionTec SBWD100B Specifications

General

Brand	ActionTec
Model	SBWD100B
Category	Receiver
Language	English