40
a. when the receiver is powered on;
b. when a connection to the receiver is established; and
c. when a power-on receiver is connected to the display device.
Note: The display device must support HDMI-CEC, and this function is enabled.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
5.3.13. Updating the Receiver’s Background Image
Follow the procedure below to update the receiver’s background:
1. Go to the Features tab page by clicking the Features tab.
2. Go to the Background Image line, and click the Browse button next to the Background
Image box.
3. The Choose File to Upload window appears. Select an image for the background and
click the Open button to confirm.