ActionTec SBWD100B User Manual

39
2. Go to the Aspect Ratio line, and select a proper option in the Aspect Ratio drop-down
box.
In case of selecting the 4:3 option, you can also fine tune the horizontal and vertical offsets.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
5.3.12. Setting up One Touch Play (HDMI-CEC)
Follow the procedure below to set up the One Touch Play (HDMI-CEC) function:
1. Go to the Features tab page by clicking the Features tab.
2. Go to the One Touch Play (HDMI-CEC) line, and set the One Touch Play (HDMI-CEC)
feature to On or Off.
There are two options: On, and Off. After this function is enabled, the receiver can wake up
the connected display device and the display device will switch to the source that the receiver
connects to.
The display device will be waked up in one of the following conditions:

ActionTec SBWD100B Specifications

General

Brand	ActionTec
Model	SBWD100B
Category	Receiver
Language	English