ActionTec SBWD100B User Manual

38
5.3.10. Adjusting TV Screen Size
Follow the procedure below to adjust the size of your TV screen:
1. Go to the Features tab page by clicking the Features tab.
2. Go to the TV Screen Size (Overscan Settings) line, and select the desired option in the
TV Screen Size (Overscan Settings) drop-down box.
 The value for TV screen size ranges from 0 to 25. The larger the value is, the bigger
the screen will be.
 Allow source device to override overscan value: When this option is enabled
(checked), the overscan value is in consistence with the setting on the source device.
Otherwise, the overscan value is in consistence with the setting on the receiver.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
5.3.11. Setting up Output Aspect Ratio
If the output does not fit your display screen due to wrong aspect ratio, you can try selecting
a proper aspect ratio for your display screen.
Follow the procedure below to adjust the aspect ratio for your TV screen:
1. Go to the Features tab page by clicking the Features tab.

ActionTec SBWD100B Specifications

General

Brand	ActionTec
Model	SBWD100B
Category	Receiver
Language	English