60
Can I push media to the Receiver using DLNA?
No. The Receiver is not a DLNA media receiver.
Does the Receiver work with the Apple iPhone, iPad, or iPod?
No. The Receiver does not support Apple devices or the AirPlay protocol.
How to set my receiver to use the 5G frequency?
Generally, the 5G band can provide clearer channels, and the receiver works in this band
can produce better performance.
To set your receiver on the 5G band, you must prepare a 5G router first. Note: not all
routers support the 5G band. You can confirm this with the product manufacturer.
When a 5G router is available, connect your device to the 5G router first, and then connect
your device to your receiver. Then your receiver will works in the 5G band.
How to identify if my device can connect to ScreenBeam Pro EDU-2?
ScreenBeam Pro EDU-2 supports Intel WiDi ready and WiFi Certified Miracast devices.
If the Intel WiDi (3.5 or higher) application is already installed on your device, your
device can connect to ScreenBeam Pro EDU-2.
If your device does not have Intel WiDi, try this simple method to check if your device
supports Intel WiDi. Download the Intel WiDi (3.5 or higher) application and try
installing it on your device.
• If it can be installed, your device supports Intel WiDi.
• If the application can’t be installed, update the drivers of the graphic adapter and
wireless adapter on your device first, and then install the application. If it can be
installed, your device supports Intel WiDi. Otherwise, your device doesn’t support
Intel WiDi.
To check if your device is Miracast enabled, check if the WiFi Certified Miracast logo is
printed on the package of your device or directly on your device, or, if the wireless
display app is available on your device. If yes, your device can connect to
ScreenBeam Pro EDU-2.
To Next Page
Loading...
Need help?
General
