ADCMT 7461A User Manual

7451A/7461A/7461P Digital Multimeter Operation Manual
6.1.1 Response to the *IDN? Command (7451A/61A Only)
6-2
Specification of response to *IDN?
Changing the response to *IDN? by key operation
1. To change to the old model name response, turn on the power while pressing the
key.
2. After all displays are lit, “OLD *IDN?” is displayed and the response is changed
to the old model name.
3. When the response is set to the old model name, the ‘ ’ indicator is activated at
the lower right of the display section.
4. To change to the new model name response, turn on the power while pressing the
key again.
5. After all displays are lit, “NEW *IDN?” is displayed and the response is changed
to the new model name.
6. When the response is set to the new model name, the ‘ ’ indicator at the lower
right of the display section is turned off.
Changing the response to *IDN? by remote command
When the response is set to the old model name, the ‘ ’ indicator is activated at the
lower right of the display section.
New model name
response
ADC Corp.,xxxxx,nnnnnnnnn,mmm
xxxxx: 7451A or 7461A (Product model name)
nnnnnnnnn: Serial No.
mmm: Revision No.
Old model name
response
ADC,xxxxxxx,nnnnnnnnn,mmm
xxxxxxx: AD7451A or AD7461A (Product model name)
nnnnnnnnn: Serial No.
mmm: Revision No.
Command Description Initial value
ADC
command
OID0 The new model name is the response to *IDN?.
OID1 The old model name is the response to *IDN?.
OID? Response: OID0 or OID1
SCPI
command
:OIDentity {ON,1|OFF,0} OFF,0: The new model name is the response to *IDN?.
ON,1: The old model name is the response to *IDN?.
:OIDentity? Response: 1 or 0
SHIFT
SHIFT

ADCMT 7461A Specifications

General

Brand	ADCMT
Model	7461A
Category	Multimeter
Language	English