7451A/7461A/7461P Digital Multimeter Operation Manual
5.12.3 Disabling Functions
5-49
using and .
Press to apply the setting.
• The relationship according to disabling the function setting
Although the ENA or DIS can be set for each function, some functions are automatically disabled
depending on the settings of other functions.
If a higher function setting in the dependency relation is disabled, no lower function setting can be
changed.
• Canceling the setting
To cancel the disabling setting and enable all functions, initialize in in or re-set
all functions in ‘F.Inhi’ in in .
Table 5-9 Relationship according to Disabling the Function
Higher function
Function depending on the higher function setting
DCV-Bch Diode
ACV
(AC+DC)
ACI
(AC+DC)
Continuity
ACI FREQ TEMP
DCV
ACV
DCI
ACI
2W/LP-2W
4W/LP-4W
FREQ
: Automatically set to ENA or DIS according to a higher function.
: Disabled if any higher functions are set to DIS, and enabled if all higher functions are set to
ENA.
: Disabled if any of higher functions is set to DIS, and not enabled even if all higher functions
are set to ENA.
To Next Page
Loading...
Need help?
General
