ADCMT 7461A User Manual

7451A/7461A/7461P Digital Multimeter Operation Manual
6.7.3 ADC Command Reference
6-22
6.7.3 ADC Command Reference
This section describes the ADC command reference of this instrument.
“Initial value” shows the status when the *RST command is executed.
CAUTION: Ensure the following when using the USB interface.
The device setting conditions are output by reading the data after executing the query command.
When executing the query command, set a wait time of 20 ms after the last command.
Item Command Description Initial value
Measurement Function F1 DC voltage measurement (DCV)
F2 AC voltage measurement (ACV)
F3 Resistance measurement (2W)
F4 Resistance measurement (4W)
F5 DC current measurement (DCI)
F6 AC current measurement (ACI)
F7 AC voltage (AC+DC coupling) measurement
(ACV(AC+DC))
F8 AC current (AC+DC coupling) measurement
(ACI(AC+DC))
F12 DC voltage Measurement DCV-Bch
F13 Diode measurement (Diode)
F20 Low power resistance measurement 2W
F21 Low power resistance measurement 4W
F22 Continuity test (Cont)
F42 Temperature measurement (TEMP, 2W) *7461P only
F43 Temperature measurement (TEMP, 3W) *7461P only
F44 Temperature measurement (TEMP, 4W) *7461P only
F50 Frequency measurement (Freq)
F? Reply: One of F01 toF08, F12 to F13, F20 to F22,
F42 to F44 or F50
Temperature unit
*7461P only
TPU0 Temperature unit C
TPU1 Temperature unit F
TPU2 Temperature unit K
TPU? Reply: TPU0 to TPU2
Temperature sensor
*7461P only
PT0 Platinum resistance bulb Pt100
PT1 Platinum resistance bulb JPt100
PT? Reply: PT0 or PT1

ADCMT 7461A Specifications

General

Brand	ADCMT
Model	7461A
Category	Multimeter
Language	English