7451A/7461A/7461P Digital Multimeter Operation Manual
5.7.2 Sampling Count Setting
5-18
5.7.2 Sampling Count Setting
Although sampling is usually performed once when a trigger is detected, sampling can be performed more
than once.
Enter the number of sampling in ‘N.Smpl’ in in .
Sampling count 1 to 16000 samples/trigger
NOTE: When data is stored in the measurement data memory in conjunction with this setting on the 7461A or
7451A, the number of data to be stored is up to 10,000 even if the number of sampling is set to more than
10,000.
For more information, refer to Section 5.11, “Storing and Recalling the Measurement Data.”
To Next Page
Loading...
