ADCMT 7461A - Page 139

7451A/7461A/7461P Digital Multimeter Operation Manual
6.7.4 SCPI Command Reference
6-39
AC filter setting
The setting is enabled in the ACV,
ACV(AC+DC), ACI, and
ACI(AC+DC) functions.
[:SENSe]:<Function>:FILTer {FAST|MED|SLOW} {FAST|MED|SLOW}
Auto-zero setting [:SENSe]:ZERO:AUTO {ON,1|OFF,0|ONCE} {1|0}
Continuity threshold constant [:SENSe]:CONTinuity:THReshold [1|10|1000] <int_4>
Switching the DCV input imped-
ance
:INPut:IMPedance:AUTO {ON,1|OFF,0} {1|0}
(1:HiZ, 0:10 M)
Function description SCPI command Parameter Query reply