ADCMT 7461A User Manual

7451A/7461A/7461P Digital Multimeter Operation Manual
8.11 Error Message List
8-22
19 Err208 LV100 zero measurement test error in analog operation
[LV 100 Zero Check]
No solution
20 Err210 Communication error in Analog
[Communication error (Analog)]
No solution
21 Err215 Ref5 V measurement test error in analog operation
[Ref 5V Check]
No solution
22 Err216 HV1 ATT measurement test error in analog operation
[Ref 5V(ATT) HV1 Check]
No solution
23 Err217 LV10 ATT measurement test error in analog operation
[Ref 5V(ATT) LV10 Check]
No solution
24 Err218 LV100 ATT measurement test error in analog operation
[Ref 5V(ATT) LV100 Check]
No solution
25 Err220 Is10 mA measurement test error in analog operation
[OhmIs 10mA Check]
No solution
26 Err221 Is5 mA measurement test error in analog operation
[OhmIs 5mA Check]
No solution
27 Err222 Is1 mA(1) measurement test error in analog operation
[OhmIs 1mA_1 Check]
No solution
28 Err223 Is1 mA(2) measurement test error in analog operation
[OhmIs 1mA_2 Check]
No solution
29 Err224 Is100 A measurement test error in analog operation
[OhmIs 100A Check]
No solution
30 Err225 Is10 A measurement test error in analog operation
[OhmIs 10A Check]
No solution
31 Err229 Leak measurement test error in analog operation
[Leak Check]
No solution
32 Err500 Calibration data error
[CAL data]
Solution4
33 Err501 ZERO calibration is not performed.
[before ZERO]
Solution5
34 Err-102 Command syntax error
[Cmd Syntax]
Solution6
35 Err-113 The command cannot be used.
[Undefined header]
Solution6
36 Err-121 Unrecognized character as the numerical value
[Invalid character in number]
Solution6
37 Err-141 Invalid character string parameter is entered.
[Invalid character data]
Solution6
38 Err-151 Error as the character string data (Quotation mark error)
[Invalid string data]
Solution6
No. Error display
Error description
[ ]: Response to the ERR? command
Solution

ADCMT 7461A Specifications

General

Brand	ADCMT
Model	7461A
Category	Multimeter
Language	English