7451A/7461A/7461P Digital Multimeter Operation Manual
5.9.2 Smoothing Calculation
5-34
4. Canceling the smoothing calculation
The smoothing calculation is canceled when any of the following conditions occur.
• The key is pressed while the smoothing calculation is performed.
• The measurement function is changed.
• The *RST command is executed.
5. Smoothing calculation and overload (OL)
If the overload occurs during the smoothing process, this measurement value is ignored.
(All measurement data except for OL data can be used in the smoothing calculation.)
To Next Page
Loading...
