ADLINK Technology VPX3-TL BIOS - Page 16

16
VPX3-TL BIOS
5-core Turbo Ratio Limit
Ratio (TRLR)
Info-only.
6-core Turbo Ratio Limit
Ratio (TRLR)
Info-only.
Energy Efficient P-state
Enabled
Disabled
Package Power Limit MSR
Lock
Enabled
Disabled
Energy Efficient Turbo Enabled
Disabled
CPU – Power Management Control ÆConfig TDP Configurations
Aptio Setup – AMI
Advanced
Config TDP Configurations
Enable Configurable TDP Applies to cTDP
Configurable TDP Boot Mode Nominal
Configurable TDP Lock Disabled
CTDP BIOS control Disabled
ConfigTDP Levels 2
ConfigTDP Turbo Activation Ratio 25 (Unlocked)
Power Limit 1 45.0W (MSR:45.0)
Power Limit 2 83.0W (MSR:83.0)
Custom Settings Nominal
ConfigTDP Nominal Ratio:26 TAR:25
PL1:13.0W ><: Select Screen
Power Limit 1 0 ^v: Select Item
Power Limit 2 0 Enter: Select
Power Limit 1 Time Window* [0] +/-: Change Opt.
ConfigTDP Turbo Activation Ratio 0 F1: General Help
F8: Previous Values
Custom Settings Down F9: Optimized Default
ConfigTDP Level1
Ratio:21 TAR:20
PL1:3.0W
F10: Save & Exit
Power Limit 1 0 ESC: Exit
Power Limit 2 0
Power Limit 1 Time Window* [0]
ConfigTDP Turbo Activation Ratio 0
BIOS Item Options Description
Enable Configurable TDP
Applies to non-cTDP
Applies to cTDP
Applies TDP initialization settings based on
non-cTDP or cTDP. Default is 1: Applies to
cTDP; if 0 then applies non-cTDP and BIOS
will bypass cTDP initialzation flow
Configurable TDP Boot
Mode
Nominal
Down
Up
Deactivate
Configurable TDP Mode as
Nominal/Up/Down/Deactivate TDP
selection. Deactivate option will set MSR
to Nominal and MMIO to Zero.