ADLINK Technology VPX3-TL BIOS - Page 17

17
VPX3-TL BIOS
BIOS Item Options Description
Configurable TDP Lock
Enabled
Disabled
Configurable TDP Mode Lock sets the Lock
bits on TURBO_ACTIVATION_RATIO and
CONFIG_TDP_CONTROL. Note:
When CTDP Lock is enabled Custom
ConfigTDP Count will be forced to 1 and
Custom ConfigTDP Boot Index will be
forced to 0.
CTDP BIOS control
Enabled
Disabled
Enables CTDP control via runtime ACPI
BIOS methods. This "BIOS only" feature
does not require EC or driver support.
ConfigTDP Levels Info-only.
ConfigTDP Turbo
Activation Ratio
Info-only.
Power Limit 1 Info-only.
Power Limit 2 Info-only.
ConfigTDP Nominal Info-only.
Power Limit 1
0 Power Limit 1 in Milli Watts. BIOS will
round to the nearest 1/8W when
programming. 0 = no custom override. For
12.50W, enter 12500. Overclocking SKU:
Value must be between Max and Min
Power Limits (specified by
PACKAGE_POWER_SKU_MSR). Other
SKUs: This value must be between Min
Power Limit and TDP
Power Limit 2
0 Power Limit 2 value in Milli Watts. BIOS
will round to the nearest 1/8W when
programming. 0 = no custom override. For
12.50W, enter 12500. Processor applies
control policies such that the package
power does not exceed this limit.
Power Limit 1 Time
Window*
[0] Power Limit 1 Time Window value in
seconds. The value may vary from 0 to
128. 0 = default value (28 sec for Mobile
and 8 sec for Desktop). Defines time
window which TDP value should be
maintained.
ConfigTDP Turbo
Activation Ratio
0 Custom value for Turbo Activation Ratio.
Needs to be configured with valid values
from LFM to Max Turbo. 0 means don't
use custom value.
ConfigTDP Level1 Info-only.
Power Limit 1
0 Power Limit 1 in Milli Watts. BIOS will
round to the nearest 1/8W when
programming. 0 = no custom override. For
12.50W, enter 12500. Overclocking SKU:
Value must be between Max and Min
Power Limits (specified by
PACKAGE_POWER_SKU_MSR). Other
SKUs: This value must be between Min
Power Limit and TDP