ADLINK Technology VPX3-TL BIOS - Page 18

18
VPX3-TL BIOS
BIOS Item Options Description
Power Limit 2
0 Power Limit 2 value in Milli Watts. BIOS
will round to the nearest 1/8W when
programming. 0 = no custom override. For
12.50W, enter 12500. Processor applies
control policies such that the package
power does not exceed this limit.
Power Limit 1 Time
Window*
[0] Power Limit 1 Time Window value in
seconds. The value may vary from 0 to
128. 0 = default value (28 sec for Mobile
and 8 sec for Desktop). Defines time
window which TDP value should be
maintained.
ConfigTDP Turbo
Activation Ratio
0 Custom value for Turbo Activation Ratio.
Needs to be configured with valid values
from LFM to Max Turbo. 0 means don't
use custom value.
CPU – Power Management Control Æ CPU VR Settings
Aptio Setup – AMI
Advanced
CPU VR Settings
PSYS Slope 0
PSYS Offset 0
PSYS Prefix [+]
PSYS PMax Power 0
Min Voltage Override [Disabled]
> Acoustic Noise Settings
> VccIn VR Settings
> RFI Settings
><: Select Screen
^v: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Default
F10: Save & Exit
ESC: Exit