ADLINK Technology VPX3-TL BIOS - Page 19

19
VPX3-TL BIOS
BIOS Item Options Description
PSYS Slope
0 PSYS Slope defined in 1/100 increments.
Range is 0-200. For a 1.25 slope, enter
125. 0 = AUTO. Uses BIOS VR mailbox
command 0x9."
PSYS Offset
0 PSYS Offset defined in 1/1000 increments.
Range is 0-63999. For an offset of 25.348,
enter 25348. PSYS Uses BIOS VR mailbox
command 0x4.
PSYS Prefix
+ Sets the offset value as positive or
negative.
PSYS PMax Power
0 PSYS PMax power, defined in 1/8 Watt
increments. Range 0-8192. For a PMax of
125W, enter 1000. 0 = AUTO. Uses BIOS
VR mailbox command 0xB.
Min Voltage Override
Enabled
Disabled
Min Voltage Override. Enable to override
minimum voltage for runtime and for C8.
Acoustic Noise Settings Submenu
VccIn VR Settings Submenu
RFI Settings Submenu
CPU – Power Management Control Æ CPU VR SettingsÆ Acoustic Noise
Settings
Aptio Setup – AMI
Advanced
Acoustic Noise Settings
Acoustic Noise Mitigation [Disabled]
Pre Wake Time 0
Ramp Up Time 0
Ramp Down Time 0
VccIn VR Domain
Disable Fast PKG C State Ramp for [FALSE]
VccIn Domain
Slow Slew Rate for VccIn Domain [Fast/2]
><: Select Screen
^v: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Default
F10: Save & Exit
ESC: Exit