ADT ACCORD XPC User Manual

30
When reporting, the panel will dial the Primary Telephone Number:
The panel receives a confirmation signal if successful and the communicator shuts down
until another report needs to be sent. If unsuccessful (i.e. the panel does not receive a
confirmation signal) the panel will try the Secondary Telephone Number.
If the panel does not communicate successfully when dialling the Secondary Telephone
Number, it alternates between each number until it either:
• Communicates with one successfully and receives a confirmation signal.
• Tries each number a total of five times. A Comms Fail indication will be given
and the communicator will shut down until another report needs to be sent.
Note: Comms Fail is indicated by a flashing ( ) icon on the keypad.
Table 3.12 Contact ID Trigger Events
2 = Contact I.D.
The panel reports using Contact I.D when Option 8
Communicator Format is set to 2. Contact I.D.
transmits event type and event source to the
monitoring station (see Table 3.12).
Note: Assistance Channel (Group 0 - Option 3)
must be non-zero for Contact I.D. to
function and report assistance events.
0 Single Report
If set to 0, event/alarm reporting operates in Single
Report mode. The panel has to communicate with
either the primary or secondary telephone number
for successfull communication.
Group 6 — Option 9 Central Station (ARC)
Receiver Handshake
This option has three settings:
0. UK.
1. Belgium.
2. Paris.
This option defaults to 0 (UK).
System Programming — Group
7 Comms Options 2
Group 7 — Option 1 Dual Reporting
This option can be programmed in one of two modes:
0. Single Report
1. Dual Report
This option defaults to 0 (Single report).
NOITIDNOCEDOCTNEVESETON
.TSISSADAPYEK101.0puorGeeS
ERIF011.8puorGeeS
SSERUD121.6puorGeeS
APTNELIS221.8puorGeeS
APELBIDUA321.8puorGeeS
REDURTNI031.8puorGeeS
REPMATYAD731.8puorGeeS
MRALADEIFIREV931.8puorGeeS
ELBUORTMETSYS003.liafesuflleB/xuAfidesU
LIAF.C.A103.8puorGeeS
WOLYRETTAB203.8puorGeeS
DEGNAHCMARGORP603
DItcatnoCfitnesylnO
.detceles
GNISSIMYRETTAB113
ttabronwolbesufttaB
.gnissim
DEMMAJREVIECER443.0puorGeeS
LIAFNOISIVREPUSFR183.0puorGeeS
WOLENOZFR
YRETTAB
483.0puorGeeS
ESOLC/NEPO104.8puorGeeS
TROBA604.8puorGeeS
TESYSAE804
esolc/nepofitnesylnO
.detcelessignitroper
TESWSK904
SSECCADAOLNWOD214
DItcatnoCfitnesylnO
.detceles
TIMOENOZ075.9puorGeeS
TSETCIDOIREP206.8puorGeeS
KODETSETTNIOP116
tseTcidoirePfitnesylnO
erotseroN.delbane
.slangis

ADT ACCORD XPC Specifications

General

Brand	ADT
Model	ACCORD XPC
Category	Security System
Language	English