51
Accord xpC - July, 2001
Section 6: Handing the System Over to
the User
Fill In the User Instructions!
User Instructions come with every Accord xpC panel that explaining end-user functions.
To minimise false alarms and unnecessary call outs it is important that the user is famil-
iar with the operation of the system. It is strongly recommended that the engineer ex-
plains fully the operation of the system to the user.
Appendix A: Specifications
Panel Specification
Physical Width: 300 mm
Height: 250 mm
Depth: 90 mm
Electrical Mains Input: 230 V a.c. 50Hz nominal
Current Drain: 30 mA (normal use)
Power Supply 12 V d.c. 750 mA
Bell Output 12 V d.c. 500 mA
Strobe Output 12 V d.c. 250 mA
Internal Speaker Driver 16 Ohms
Note: Due to continued product development these specifications may change without notice.
To Next Page
Loading...
