Adtech CNC9650 User Manual

ADTECH9 Series CNC Maintenance Manual
- 139 -
016 X axis manual speed
Y axis manual speed
Z axis manual speed
A axes manual speed
B axis manual speed
C axis manual speed
Range : 0~9999
Unit : mm/min
Authority : Operation admin or higher
Default : 1000
Effective time : Instant
Note : Set the manual speed of every axis separately
The starting speed and acceleration are determined by parameters 003 &
004.
017 X-axis corner speed smoothing level
Y-axis corner speed smoothing level
Z-axis corner speed smoothing level
A-axis corner speed smoothing level
B-axis corner speed smoothing level
C-axis corner speed smoothing level
018 X axis max restrain rate (mm/sec)
Y axis max restrain rate (mm/sec)
Z axis max restrain rate (mm/sec)
A axis max restrain rate (mm/sec)
B axis max restrain rate (mm/sec)
C axis max restrain rate (mm/sec)
Range : 1~90000
Unit :
Authority : Super Admin
Default : 90000
Effective time : Instant
Note : Used to configure the restriction acceleration of every axis during

Adtech CNC9650 Specifications

General

Brand	Adtech
Model	CNC9650
Category	Control Systems
Language	English