Adtech CNC9650 User Manual

ADTECH9 Series CNC Maintenance Manual
- 163 -
Range : Axis group 1 Axis group 2 GRUN4 GRUN5 GRUN6
Unit : None
Authority : Super user
Default : XYZ
Effective time : Instant
Note : To set the multi-channel G code configuration that is started in parallel
when the system starts running the machining program
020 Sys debug information enable
Range : 0~1
Unit : None
Authority : Super user
Default : OFF/0
Effective time : Instant
Note : Used to configure whether RS232 of current system outputs the testing info
while program is running.
This parameter is dedicated for programmers, and the users are not
suggested using this parameter.
If the testing info is enabled, the system performance will be lowered, and
therefore it is disabled during normal processing.
If networking is enabled, this function must be disabled, or else the
networking will fail.
021 Axis control composite enable
Range : 0~1
Unit : None
Authority : Super user
Default : ON/1
Effective time : Instant
Note : Used to configure whether the key for axis motion on the control panel is
enabled.
This parameter is used to shield the composite function of the key for axis
motion on the NC panel and reduce the possibility of misoperation when

Adtech CNC9650 Specifications

General

Brand	Adtech
Model	CNC9650
Category	Control Systems
Language	English