Page 2 of 42
Item Specification Details
Ex-3001
Enclosure Steel IP30
Dimensions H x W x D mm 330 x 400 x 90
Environmental Class Class A – Indoor IP30 0°C to 40°C
Humidity 95 % Max
Weight (excluding batteries) 5.1Kg
Cable Entries (20mm knockouts) 17x top and 13x top rear
Mains Supply 200V-240V (+10%, -15%), 50/60Hz AC, 1.0A max
Power Supply 24V DC, 3A High Efficiency Switched Mode [2A load, 1A battery charging]
Battery Capacity 24V 4Ah Internal (min), 24V 7Ah Internal (max)
Charging Current 1.0A Temperature Compensated (27.4V DC nominal at 20°C)
Number of Fire Zones 3
Number of Flooding Zones 1
Actuator Output 24V DC, 1.0A suitable for either Metron or Solenoid
Sounder Outputs 3x rated at 1A each programmable
Relay Outputs 4x rated at 1A 30VAC/DC (max) 10mA 5V (min) [2x Fixed – Fire / Fault, 2x Programmable]
Relay Outputs (Optional) 8x rated at 1A 30VAC/DC (max) 10mA 5V (min) programmable (requires MXP-008)
Key-Switches (Optional) 2x Programmable
External Inputs (Monitored) 7x Fixed (Mode, Manual Trigger, Hold, Abort, Flow Monitor, Valve Monitor, Pressure Monitor)
4x Programmable
AUX Supply Output 24V DC, 0.5A
Communications RS485 to Remote Status Indicators
Display Graphic LCD 124x64 dots
LED Indicators 26
Event log 100 Fire / Trigger Events, 500 General Log Events
Approvals (pending) BS EN 12094-1: 2003, BS EN 54-2: 1998 +A1, BS EN 54-4: 1998 +A2
As our policy is one of constant product improvement the right is therefore reserved to modify product specifications without prior notice
To Next Page
