Page 32 of 42
Parameter Comments / Description Options Default
Setting
Reset Mode Determines if the user is presented with the choice of
resetting ‘gas only’ or ‘fire & gas’ on a reset , alternativley
no menu is presented and ‘fire & gas’ are always reset.
PROMPT
ALL
PROMPT
Daylight Saving Used to turn on/ off daylight saving mode – which
automatically shifts the current time forward/ backwards by
1 hour on programmed days of the year.
ON
OFF
ON
Section 7.6
Reset from the fire alarm condition.
For full compliance with both EN54-2 and EN12094-1 the ‘PROMPT’ option
must be selected for Reset Mode. For compliance with only 12094-1 select the
‘ALL’ option. This option provides a single reset button action to reset the
system (note reset is inhibited during the activation condition).
3.3.7.1 Daylight Saving Options
The display presents a menu of the daylight saving configuration.
Parameter Comments / Description Options Default
Setting
Enabled Determines whether the daylight saving function is on or
off. On means that the time will be shifted forwards &
backwards by 1 hour, two times a year on the dates
determined below.
ON
OFF
ON
Forward Order Specifies which occurance of the day specified (below) in
the month specified (below) the time will be shifted
forwards by 1 hour (at 2AM the time will change to 3AM).
1
ST
2
ND
3
RD
4
TH
LAST
LAST
Forward Day Specifies on which day of the week the time will be shifted
forwards by 1 hour.
MON – SUN
SUN
Forward Month Specifies in which month the time will be shifted forwards
by 1 hour .
JAN – DEC
MAR
Back Order Specifies which occurance of the day specified (below) in
the month specified (below) the time will be shifted back by
1 hour (at 2AM the time will change to 1AM).
1
ST
2
ND
3
RD
4
TH
LAST
LAST
Back Day Specifies on which day of the week the time will be shifted
back by 1 hour.
MON – SUN
SUN
Back Month Specifies in which month the time will be shifted back by 1
hour.
JAN – DEC
OCT
To Next Page
