Advanced Instruments 4C3 - Page 115

93
Troubleshooting Table
Symptom
Check
Suggested Action
System
Lockups
System Reboots
1. Is your power cord
loose?
2. Does vibration trigger
the reboot?
3. Is your power source
stable?
4. Can you reproduce the
problem?
5. Try reducing the speed
at which you are enter-
ing commands.
a. Reseat the cord.
b. Contact Advanced
Instruments.
c. Check to see if any
other equipment is also
experiencing trouble.
d. Contact Advanced
Instruments.
e. If this does not work,
contact Advanced
Instruments.
1. Turn off power for
15 seconds and
restart the instrument.
Can you reproduce
the problem?
2. Try reducing the
speed at which
you are entering
commands.
a. Contact Advanced
Instruments.
b. If this does not work,
contact Advanced
Instruments.