The Advanced
®
Model 4C3 User’s Guide
98
Regulatory
approval type
Description
U.S. Safety This product has been listed by ETL testing laborato-
ries as being in compliance with the requirements of
UL 61010-1, “Electrical Equipment for Laboratory
Use; Part 1: General Requirements”. The “US” in
the lower right of the ETL mark demonstrates this list-
ing.
Canadian Safety This product has been listed by ETL testing laborato-
ries as being in compliance with the requirements of
CAN/CSA C22.2 No. 61010-1, “Safety Requirements
for Electrical Equipment for Measurement, Control
and Laboratory Use; General Requirements”; Including
Amendment Two. The “C” in the lower left of the ETL
mark demonstrates this listing.
EMC This product meets the intent of Directive 2004/108/EC
for Electromagnetic Compatibility. Compliance was
demonstrated using the following standards.
· IEC 61326-1: Group 1, Class A, “Electrical
Equipment for Measurement, Control, and
Laboratory Use: Genral Requirements.”
Low Voltage Safety This product meets the intent of Directive 2006/95/EC,
for Low Voltage Safety. Compliance was demon-
strated using the following standards.
· IEC 61010-1, “Safety Require-ments for Electrical
Equipment for Measurement, Control and
Laboratory Use - General Require-ments”.
To Next Page
Loading...
Need help?
General
