OsmoPRO® Multi-Sample Micro-Osmometer User’s Guide
19
The program Main screen (Figure 1.13) displays once the software loads completely.
Figure 1.13: OsmoPRO Main Screen
The Main screen is the starting point for all OsmoPRO software functions (e.g., Loading,
Results, Calibration, Diagnostics, and Settings). These functions described in detail in
subsequent sections.
The left side of the Main screen represents the current status of the turntable. Information
regarding the tube position number, Sample ID, date and time, result, and test progress appears
as the turntable is loaded and tests complete.
• The right side of the Main screen displays the test results.
• The top right corner displays instrument status.
• The Main screen also provides access to information using the two symbols in the
lower-left corner of the screen (see Chapter 3).
NOTE: If the instrument does not power on, or if the behavior while powered on does not match
what is listed in Installation & Setup sections, contact Advanced Instruments Hot-Line Technical
Service.
To Next Page
Loading...
