OsmoPRO® Multi-Sample Micro-Osmometer User’s Guide
40
Figure 6.2: Filter
6.2 LIS
The user can manually send sample test results to the LIS Server by pressing LIS.
• Select the desired records by pressing them, which highlights them in blue.
• After selecting, press LIS to send the results to the LIS Server.
6.3 Print
Use this function to print records from the results database.
In the Results screen, press the rows containing the desired results, highlighting them blue.
Select the desired records by pressing them, which highlights them in blue. Multiple rows may
be selected at a time. Once the user selects the desired results, press PRINT.
The printout shows the following result information: Date, Result, Sample ID (if enabled), Time,
User ID (if enabled), and Details. An example of a printout is shown below (Figure 6.3).
Figure 6.3: Results Printout
To Next Page
Loading...
