Advanced Instruments OsmoPRO Multi-Sample - Load Printer Paper

OsmoPRO® Multi-Sample Micro-Osmometer User’s Guide
14
Printer
Touchscreen Display
Turntable
Proximity Sensor
Barcode Scanner
USB Port
Figure 1.4: OsmoPRO Front View
1.5 Load printer paper
Install as follows:
• Lift open the printer door at top of instrument (Figure 1.5).
• Unroll 4-6” (15-20 cm) of thermal paper from the roll.
• Hold the roll so paper feeds upwards from the bottom of the roll towards the front of the
instrument, and place the roll into the printer.