OsmoPRO® Multi-Sample Micro-Osmometer User’s Guide
45
7.2 Language
To change the language of the instrument, press LANGUAGE. The user is prompted to select a
user and enter a password. The Language screen opens (Figure 7.4).
• To change the language, select the desired language. Press SAVE. A message
displays: restart to apply the change.
• Power the instrument off using the power switch on the rear of the instrument. Wait 10
seconds and power on the instrument.
• Upon power up, the instrument displays and prints the newly selected language.
Figure 7.4: LANGUAGE
7.3 Users
To modify the user account information, press USERS. Select a user and enter a password.
The Users screen opens (Figure 7.5). Here the supervisor can add, delete, and edit user
accounts.
• Press EXIT to return to the settings Main screen.
Figure 7.5: Users
To Next Page
Loading...
