Advanced Instruments OsmoPRO Multi-Sample - Date & Time

OsmoPRO® Multi-Sample Micro-Osmometer User’s Guide
44
7.1 Date & time
To change the date and time settings, press DATE & TIME. The user is prompted to select a
user, then enter the password. The Date & Time screen opens. (Figure 7.3)
Figure 7.3: Date & Time
From this screen, the user can change various date & time related settings. The current
date/time is displayed at the top of the screen.
• After making changes, press SAVE.
• Press EXIT to return to the Settings screen.
7.1.1 Date
• To change the date, select the desired field, then use the arrow icons to make the
changes.
7.1.2 Time
• To change the time, select the desired field, then use the arrow icons to make the
changes.
7.1.3 Regional format settings
• To modify the regional format settings, un-check the Use Regional Format Settings
option. The user can change the instruments date format based on their own regional
format.
• To change the date, year, and time format select desired format by pressing on the
circular button.
• To change the delimiter setting, select the desired delimiter from the options.