OsmoPRO® Multi-Sample Micro-Osmometer User’s Guide
5
Safe use
To reduce the risk of bodily injury, electric shock, fire, and damage to the instrument, read and
observe the precautions in this User’s Guide.
If the product is used in a manner not in accordance with the equipment design, operating
instructions or manufacturer’s recommendations, the operation of the product may be impaired
to the extent a safety hazard is created.
Do not attempt to perform electrical work if you are not fully qualified. This manual is not a
substitute for electrical training.
Symbol conventions
The below list of symbols is for reference only. Not all symbols shown may be used on this
instrument or in the accompanying documentation.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (service) instructions in the literature
accompanying this product.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of uninsulated dangerous voltage within the product’s
enclosure. The dangerous voltage may be of sufficient magnitude to constitute risk of
electric shock to persons.
The static symbol within an equilateral triangle is intended to alert the user to the
presence of internal components which could be damaged by static electricity.
This static symbol is intended to alert the user to the presence of a specific component
which could be damaged by static electricity.
This symbol indicates the presence of alternating current (AC).
This symbol indicates the presence of a fuse.
This symbol indicates the presence of protective earth ground.
This symbol indicates the power is ON.
This symbol indicates the power is OFF.
Additional symbol definitions are available in Appendix G.
To Next Page
Loading...
