Advanced Instruments OsmoPRO Multi-Sample - Testing - Loading Samples

OsmoPRO® Multi-Sample Micro-Osmometer User’s Guide
30
4.1 Testing – loading samples with turntable installed on instrument
• To begin a batch of sample tests, press LOAD.
• [IF USER ID IS REQUIRED] Select a User ID (Figure 4.1) and then press ENTER. Enter
the password using the keyboard (Figure 4.2), then press ENTER.
Figure 4.1: Select User
Figure 4.2: Enter Password
The turntable will either:
• Complete a full rotation and stop with position one at the load position if the turntable is
empty (Figure 4.3), or
• Move the next available tube position to the load position (Figure 4.3).