Advantech AIMB-503 - Security Setting

63 AIMB-503 User Manual
Chapter 3 BIOS Operation
 Setup Prompt Timeout
This item allows you to change number of seconds to wait for setup activation
key.
 Bootup NumLock State
Select the Power-on state for Numlock.
 Quiet Boot
If this option is set to Disabled, the BIOS display normal POST messages. If
Enabled, an OEM Logo is shown instead of POST messages.
 Boot Option #1
Set the system boot order.
 Boot Option #2
Set the system boot order.
3.6 Security Setting
Select Security Setup from the AIMB-503 Setup main BIOS setup menu. All Security
Setup options, such as password protection and virus protection are described in this
section. To access the sub menu for the following items, select the item and
press<Enter>: Change Administrator / User Password.
 Administrator Password
Select this option and press <ENTER> to access the sub menu, and then type
in the password. Set the Administrator password.
 User Password
Select this option and press <ENTER> to access the sub menu, and then type
in the password. Set the User Password.