AEMC 205 - The Display; Display Symbols

11
1.3 THE DISPLAY
5
Figure 4: The Display
Item Function See §
1 Mode selection display 2
2 Display of the measurement value and unit 3.5 to 3.12
3 Display of the MAX/MIN/PEAK modes 2.4
4 Type of measurement (AC or DC) 2.2
5 Total 3-phase power measurements 3.11.2
6 Selected resistance mode display 1.1
7 Low battery indication 5.3
1.3.1 Display Symbols
Symbol Designation
AC Alternating current or voltage
DC Direct current or voltage
AC+DC
Alternating and direct current or voltage
∆
REL
Relative value, with respect to a reference
∆
Ref
Reference value
Storage of the values and display hold
Max Maximum DC or RMS value
Min Minimum DC or RMS value
PEAK+
Maximum peak value
1
2
3
4
7
6