19
2.6 BUTTON
This button is used to display and store the reference value in the unit of
magnitude measured, or to display the differential and relative values, in %.
NOTE: This button is not functional in phase rotation mode.
Successive
presses on
Function
short
Enters the ΔREL mode, to store, then display the reference
value. The ΔRef symbol is displayed.
- Displays the differential value:
(current value – reference (∆))
The ΔREL symbol is displayed.
- Displays the relative value in %
(current value – reference (∆))
The ΔREL and % symbols are displayed.
- Displays the reference. The ΔRef symbol is displayed
- Displays the current value. The ΔRef symbol blinks.
long (>2 sec)
- Exits from the ΔREL mode
NOTE: The “Relative mode
ΔREL” function can also be used with the functions of
the MAX/MIN/PEAK mode.
To Next Page
Loading...
