Aeris F10 - Set Daily Alarm

31
SET DAILY ALARM, information includes (Fig. 21):
> AM (or PM) icon, if set for 12 Hour Format
> Graphics ALRM and SEt
> Alarm Time (hr:min) with the HOUR Set Point flashing
> Alarm icon
• Pressing and releasing the S button momentarily (< 2
seconds) while the Hour Set Point is flashing will step
upward through the Set Points in 1 Hour increments from
12: AM to 11: PM (or 0: to 23: if 24 hour format).
• Depressing and holding the S button while the Hour Set Point is flashing will
scroll upward through the Set Points at a rate of 8 per second.
• Pressing and releasing the M button momentarily (< 2 seconds) will step
back through the Set Points in 1 Hour decrements.
• Pressing and releasing the A button momentarily (< 2 seconds) will save the
Hour Set Point and/or advance to Set Minute with the Set Point flashing.
• Pressing and releasing the S button momentarily (< 2 seconds) while the
Minute Set Point is flashing will step upward through the Set Points in 1
Minute increments from :00 to :59.
• Depressing and holding the S button while the Minute Set Point is flashing
will scroll upward through the Set Points at a rate of 8 per second.
• Pressing and releasing the M button momentarily (< 2 seconds) will step
back through the Set Points in 1 Minute decrements.
• Pressing and releasing the A button momentarily (< 2 seconds) will save the
Minute Set Point and/or advance to the Daily Alarm Status screen indicated
by the graphic ON (or OFF) flashing.
• Depressing and holding the M button for 2 seconds will revert to the Watch
Default Time screen.
Fig. 21 - SET DAILY
ALARM