Aeris F10 - Set Backlight Duration; Set BDSI (between Dive Surface Interval)

56
SET BACKLIGHT DURATION, information includes (Fig. 54):
> Graphics GLO and durA (meaning Backlight Duration)
> Set Point (min:sec) flashing with TIME icon
• Pressing and releasing the S button momentarily and
repeatedly (< 2 seconds each time) will step upward
through the Set Points of 0:00, 0:05, 0:10, 0:30, 1:00
(min:sec) one at a time.
• Pressing and releasing the M button momentarily and
repeatedly (< 2 seconds each time) will step back through
the Set Points one at a time.
• Pressing and releasing the A button momentarily (< 2
seconds) will accept the Set Point and access Set BDSI.
• Depressing the M button for 2 seconds, or if no button is
pressed during a period of 2 minutes, operation will
revert the SURF MAIN screen.
SET BDSI, information includes (Fig. 55):
> Graphic BDSI (meaning Between Dive Surface Interval)
> Set Point flashing with SURF and TIME icons
• Depressing the S button will scroll upward through the Set
Points at a rate of 8 per second from :01 to 1:00
(min:sec) in increments of 1 second.
• Pressing and releasing the S button momentarily and
repeatedly (< 2 seconds each time) will step upward
through the Set Points one at a time.
Fig. 55 - SET BDSI
Fig. 54 - SET
BACKLIGHT