23
• Pressing and releasing the M button momentarily (< 2
seconds) will step back through the Set Points in 1 Month
decrements.
• Pressing and releasing the S button momentarily (< 2
seconds) while the Day Set Point is flashing (Fig. 12) will
step upward through the Set Points in 1 Day increments
from 1 to 31.
• Depressing and holding the S button while the Day Set
Point is flashing (Fig. 12) will scroll upward through the
Set Points at a rate of 8 per second.
• Pressing and releasing the M button momentarily (< 2
seconds) will step back through the Set Points in 1 Day
decrements.
• Pressing and releasing the A button momentarily (< 2
seconds) will save the Set Point and/or advance to the
Main Time screen.
NOTE: Day of the Week is set automatically based upon the
Date that has been set.
ALT (ALTERNATE) TIME
As previously indicated, ALT TIME is the current Time at a remote travel location.
Upon arrival at the location, ALT Time can be interchanged with Main (home)
Time to make it the Watch Default Time while visiting the travel location.
• Pressing and releasing the M button momentarily (< 2 seconds) while the
Main (home) Time screen is displayed will access the ALT TIME screen.
Fig. 12 - SET DAY
To Next Page
Loading...
