39
• Depressing the M button for 2 seconds, or if no button is
pressed during a period of 2 minutes, operation will revert
to the SURF MAIN screen.
NOTES: Once the CDT has been Set and
Started (by selecting ON), it will continue to
run in the background while on the surface
until turned OFF (stopped) or the Time reaches
0:00 (min:sec) at which time the Alarm will
strike, the message TIMR will flash (Fig. 32),
and the CDT will revert to OFF.
Upon descending to 4 FT/1.2 M for 1 second
(i.e., entry into Dive Mode), operation of the
Free CDT will continue, if in progress.
During dives, the CDT can be turned OFF
(stopped) and ON (started), but not Set.
SET FREE CDT (Surface only), information includes (Fig. 33) -
> Graphic TIMR
> Timer setting (min:sec), colon solid and Minute Set Point
flashing, with the TIME icon
> Graphic SEt
Fig. 32 - SURF MAIN
CDT ALARM
Fig. 33 - SET CDT
To Next Page
Loading...
