40
• Pressing and releasing the S button momentarily (< 2
seconds) while the Minute Set Point is flashing will step
upward through the Set Points from 0: to 59: in 1 Minute
(1:) increments.
• Depressing the S button while the Minute Set Point is
flashing will scroll upward through the Set Points at a rate
of 8 per second.
• Pressing and releasing the M button momentarily (< 2
seconds) will step back through the Set Points in 1 Minute
(1:) decrements.
• Pressing and releasing the A button momentarily (< 2
seconds) will save the Minute Set Point and advance to Set
Seconds with the Set Point flashing.
• Pressing and releasing the S button momentarily (< 2
seconds) while the Seconds Set Point is flashing will step
upward through the Set Points from :00 to :59 in 1
Second (:01) increments.
• Depressing the S button while the Seconds Set Point is
flashing will scroll upward through the Set Points at a rate
of 8 per second.
• Pressing and releasing the M button momentarily (< 2
seconds) will step back through the Set Points in 1 Second
(:01) decrements.
• Pressing/releasing the A button momentarily (< 2 seconds)
will save the Set Point indicated by the graphic OFF
flashing (Fig. 34) in place of the graphic SEt.
Fig. 34 - CDT SET
(ready to Start)
To Next Page
Loading...
