47
The SRT (Surface Recovery Time) Alarm provides an alert when a set 'recovery
time' has elapsed after surfacing from a dive.
The EDT (Elapsed Dive Time) Alarm repeats each time the Time Interval set is
reached during operation in Dive Mode.
The RDI (Repeating Depth Interval) Alarm repeats each time the Depth Interval set
is reached, except when the DD Alarms strike. If a series of descents, ascents,
descents is made, the Alarm will activate during each of the Descents.
The DD 1, 2, 3 (Descending Depth) Alarms can only be Set at progressively
deeper Depths, with alerts given when each Depth set is reached during descents.
SET AUDIBLE ALARM, information includes (Fig. 44):
> Graphic AUD (meaning Audible)
> Set Point graphic ON (or OFF) flashing
• Pressing and releasing the S button (< 2 seconds) will
toggle between ON and OFF.
• Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and access Set SRT Alarm.
• Depressing the M button for 2 seconds or if no button is
pressed for a period of 2 minutes, operation will revert to
the SURF MAIN screen.
Fig. 44 - SET AUDIBLE
ALARM
To Next Page
Loading...
