Aeris F10 - WATCH DAILY ALARM

30
WATCH DAILY ALARM
When set ON, the Watch Daily Alarm will sound the Audible Alarm and flash the
red LED every day at the Time set.
• Pressing the M button momentarily 4 times (< 2 seconds each time) while the
Watch Default Time screen is displayed will access the Daily Alarm Status
screen.
DAILY ALARM STATUS, information includes (Fig. 20):
> AM (or PM) icon
> Graphics ALRM, and ON (or OFF) flashing
> Alarm Time Set Point (hr:min) with TIME icon
> Alarm icon
• Pressing and releasing the S button momentarily (< 2 seconds) will toggle
between ON and OFF.
> Upon being toggled to ON, the Daily Alarm will sound every day at the
Time set while on the surface.
• Depressing both the A and S buttons simultaneously for 2
seconds will access the Set Daily Alarm screen allowing a
new Time to be set.
• Depressing and holding the M button for 2 seconds will
revert to the Watch Default Time screen.
• Pressing the L button will activate the Backlight.
> If no button is pressed during a period of 2 minutes, the unit
will revert to the Watch Default Time screen.
Fig. 20 - DAILY ALARM
STATUS