Aeris F10 - Set Wet Activation; Set Units

55
SET WET ACTIVATION, information includes (Fig. 52):
> Graphics WET and ACt
> Set Point graphic ON (or OFF) flashing
• Pressing and releasing the S button momentarily (< 2
seconds) will toggle between ON and OFF.
• Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and access SET Units.
• Depressing the M button for 2 seconds, or if no button is
pressed for a period of 2 minutes, operation will revert to
the SURF MAIN screen.
SET UNITS, information includes (Fig. 53):
> Graphic UNIT
> Set Point, FT icon and F graphic (or M icon and C
graphic) flashing, with degrees icon
• Pressing and releasing the S button momentarily (< 2
seconds) will toggle between Imperial (FT, F) and Metric
(M, C).
• Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and access Set Backlight
Duration.
• Depressing the M button for 2 seconds, or if no button is
pressed for a period of 2 minutes, operation will revert to
the SURF MAIN screen.
Fig. 53 - SET UNITS
- or -
Fig. 52 - SET WET
ACTIVATION