LOCAL OPERATION
3-14
Power Up From
Successive presses of this key will toggle through the options available for configuration of the
Service Monitor at ‘Power Up’.
Last Used Store 0
Store 0 is loaded with the current settings each time power is removed from the instrument. With
this selection made, the instrument will power up to the same settings as when power was
removed, whether this was by user action or through power failure.
Preset Store 1
Store 1 contains the factory preset settings. With this selection made, the instrument will power
up to the Rx TEST mode with all settings, for every mode, to the factory preset settings and
options.
User Store 2
Store 2 is the first user accessible store, which is loaded through the user memory function. With
this selection made, the instrument will power up to the settings stored in user memory store 2
without having to access the memory as a separate function.
Access to the user memory is by pressing the orange [MEM] key. See Stores, settings/results,
later in this chapter, starting on page 3-90.
Return
Returns to the last screen displayed prior to the pressing of the Help/Setup mode key.
Return (on the HELP/SETUP screen)
Returns to the last used main mode.
To Next Page
Loading...
