Deployment Guide 37
Chapter 3 The HiveAP 28 Outdoor Platform
The Aerohive HiveAP 28 is a new generation wireless access point that is customized for outdoor use. It is mountable
in any direction and on any hard surface, post, or wire strand. It can receive power either through an Ethernet cable
or power cord.
This guide combines product information, installation instructions, and configuration examples for both the HiveAP
and HiveManager platforms. This chapter covers the following topics relating to the HiveAP 28:
• "HiveAP 28 Product Overview" on page 38
• "Ethernet Port" on page 39
• "Power Connector" on page 40
• "Antennas" on page 41
• "Mounting the HiveAP 28 and Attaching Antennas" on page 42
• "Pole Mount" on page 43
• "Strand Mount" on page 44
• "Surface Mount" on page 45
• "Attaching Antennas" on page 46
• "Device, Power, and Environmental Specifications" on page 48
Note: Do not open the HiveAP 28 chassis. There are no serviceable parts inside.
To Next Page
Loading...
